CLT create-snapshot

author	version	line-number	content
		1	=== create-snapshot ===
		2
		3	{{noformat}}
		4
		5	create-snapshot <file> <address> <OID>
		6
		7	Creates a snapshot <file> by walking the subtree specified by <OID> at the
		8	agent at <address>.
		9
		10	Options:
		11	-A authPassphrase Set the authentication pass phrase for
		12	authenticated SNMPv3 messages.
		13	-CB Display brief column headers. Common prefixes will
		14	be dropped.
		15	-CH Do not display column headers.
		16	-Cb bufferSize The number of table rows to buffer before computing
		17	column sizes.
		18	-Cc columnWidth Print table columns with specified character width.
		19	-Cf columnSeparator Separate table columns with the specified separator
		20	string. The table is printed in compact form. By
		21	default columns are separated by spaces and
		22	aligned.
		23	-Ch Display only column headers.
		24	-Ci Prepend the index for each printed row.
		25	-Cil lowerBoundIndex Set the lower bound index for TABLE operations.
		26	-Ciu upperBoundIndex Set the upper bound index for TABLE operations.
		27	-Cl Left justify all cells when printing a table.
		28	-Cn non-repeaters Set the non-repeaters field for GETBULK PDUs. It
		29	specifies the number of supplied variables that
		30	should not be iterated over. The default is 0.
		31	-Cr max-repetitions Set the max-repetitions field for GETBULK PDUs.
		32	This specifies the maximum number of iterations
		33	over the repeating variables. The default is 10.
		34	-Cw Specify the line width when printing tables
		35	-Dn Do not use any default option values stored in
		36	config.
		37	-E contextEngineID Set the context engine ID used for the SNMPv3
		38	scoped PDU. The authoritative engine ID will be
		39	used for the context engine ID, if the latter is
		40	not specified.
		41	-L license key Specify license and associated key. The license
		42	info will be saved in the SNMP4J-CLT config file in
		43	your home directory. Enter each license part
		44	enclosed in quotes, for example by '-L "b6 80 4d 68
		45	3a 8 c0 f4" "O?fWO-3s"'
		46	-M mibRepositoryPath Set the path to the MIB repository to be used to
		47	resolve object names (OIDs) and parse/format object
		48	values ('repository' is the default). The
		49	repository directory must contain compiled MIB
		50	modules files only.
		51	-Msmi mibRepositoryPath Set the path to the MIB repository to be used to
		52	resolve object names (OIDs) and parse/format object
		53	values ('repository' is the default). The MIB
		54	repository directory must contain SMI MIB files
		55	(v1/v2). The file names of the MIB files have to
		56	match their MIB module name or there has to be a
		57	properties file named 'module-index.properties'
		58	which maps to the module file by
		59	'<modulename>.path=<path>' entries.
		60	-Ors maxSizeRespPDU The maximum size of the response PDU in bytes.
		61	-OtCSV For each SNMP row received exactly one row of comma
		62	separated values will printed to the console where
		63	the first column contains the row index.
		64	-Otd Activates dense table operation mode which improves
		65	table retrieval performance on regular (dense)
		66	tables. This option must not be used with sparse
		67	tables.
		68	-OttCSV Same as -OtCSV except that each row's first column
		69	will report the current time (millis after
		70	1.1.1970) when the request has been sent.
		71	-Y privacyPassphrase Set the privacy pass phrase for encrypted SNMPv3
		72	messages.
		73	-a authProtocol Set the authentication protocol used to
		74	authenticate SNMPv3 messages. Valid values are MD5
		75	and SHA.
		76	-bc engineBootCount Set the engine boot count to the specified value
		77	greater or equal to zero. Default is zero.
		78	-c community Set the community for SNMPv1/v2c messages.
		79	-d debugLevel Set the global debug level for Log4J logging
		80	output. Valid values are OFF, ERROR, WARN, INFO,
		81	and DEBUG.
		82	-e engineID Set the authoritative engine ID of the command
		83	responder used for SNMPv3 request messages. If not
		84	supplied, the engine ID will be discovered.
		85	-h windowSize Set the window height in rows. If the value is
		86	greater than zero, every windowSize rows the user
		87	is prompted to continue output. Default is zero.
		88	-l localEngineID Set the local engine ID of the command generator
		89	and the notification receiver used for SNMPv3
		90	request messages. This option can be used to avoid
		91	engine ID clashes through duplicate IDs leading to
		92	usmStatsNotInTimeWindows reports.
		93	-m mibModuleName Load the specified MIB module from the MIB
		94	repository specified by the -M option. The
		95	mibModuleName can be a regular expression, e.g. use
		96	'SNMPv2-.*' to load all MIB modules in the
		97	repository that start with 'SNMPv2-'.
		98	-n contextName Set the target context name for SNMPv3 messages.
		99	Default is the empty string.
		100	-r retries Set the number of retries used for requests. A zero
		101	value will send out a request exactly once. Default
		102	is 1.
		103	-s Suppress any output on stderr (silent mode).
		104	-t timeout Set the timeout in milliseconds between retries.
		105	Default is 1000 milliseconds.
		106	-u securityName Set the security name for authenticated v3
		107	messages.
		108	-v 1\|2c\|3 Set the SNMP protocol version to be used. Default
		109	is 3.
		110	-w consoleWidth Specifies the width of the console output, default
		111	is 80 characters.
		112	-y privacyProtocol Set the privacy protocol to be used to encrypt
		113	SNMPv3 messages. Valid values are DES, AES
		114	(AES128), AES192, AES256, and 3DES(DESEDE).
		115
		116	Examples:
		117	SNMP4J-CLT -v 2c -c public create-snapshot /tmp/mibdump.sf 127.0.0.1/161 1.3.6
		118
		119	{{/noformat}}

Wiki source code of CLT create-snapshot