CLT create-snapshot

    create-snapshot <file> <address> <OID>

    Creates a snapshot <file> by walking the subtree specified by <OID> at the
    agent at <address>.

    Options:
    -A    authPassphrase    Set the authentication pass phrase for
                            authenticated SNMPv3 messages.
    -CB                     Display brief column headers. Common prefixes will
                            be dropped.
    -CH                     Do not display column headers.
    -Cb   bufferSize        The number of table rows to buffer before computing
                            column sizes.
    -Cc   columnWidth       Print table columns with specified character width.
    -Cf   columnSeparator   Separate table columns with the specified separator
                            string. The table is printed in compact form. By
                            default columns are separated by spaces and
                            aligned.
    -Ch                     Display only column headers.
    -Ci                     Prepend the index for each printed row.
    -Cil  lowerBoundIndex   Set the lower bound index for TABLE operations.
    -Ciu  upperBoundIndex   Set the upper bound index for TABLE operations.
    -Cl                     Left justify all cells when printing a table.
    -Cn   non-repeaters     Set the non-repeaters field for GETBULK PDUs. It
                            specifies the number of supplied variables that
                            should not be iterated over. The default is 0.
    -Cr   max-repetitions   Set the max-repetitions field for GETBULK PDUs.
                            This specifies the maximum number of iterations
                            over the repeating variables. The default is 10.
    -Cw                     Specify the line width when printing tables
    -Dn                     Do not use any default option values stored in
                            config.
    -E    contextEngineID   Set the context engine ID used for the SNMPv3
                            scoped PDU. The authoritative engine ID will be
                            used for the context engine ID, if the latter is
                            not specified.
    -L    license key       Specify license and associated key. The license
                            info will be saved in the SNMP4J-CLT config file in
                            your home directory. Enter each license part
                            enclosed in quotes, for example by '-L "b6 80 4d 68
                            3a 8 c0 f4" "O?fWO-3s"'
    -M    mibRepositoryPath Set the path to the MIB repository to be used to
                            resolve object names (OIDs) and parse/format object
                            values ('repository' is the default). The
                            repository directory must contain compiled MIB
                            modules files only.
    -Msmi mibRepositoryPath Set the path to the MIB repository to be used to
                            resolve object names (OIDs) and parse/format object
                            values ('repository' is the default). The MIB
                            repository directory must contain SMI MIB files
                            (v1/v2). The file names of the MIB files have to
                            match their MIB module name or there has to be a
                            properties file named 'module-index.properties'
                            which maps to the module file by
                            '<modulename>.path=<path>' entries.
    -Ors  maxSizeRespPDU    The maximum size of the response PDU in bytes.
    -OtCSV                  For each SNMP row received exactly one row of comma
                            separated values will printed to the console where
                            the first column contains the row index.
    -Otd                    Activates dense table operation mode which improves
                            table retrieval performance on regular (dense)
                            tables. This option must not be used with sparse
                            tables.
    -OttCSV                 Same as -OtCSV except that each row's first column
                            will report the current time (millis after
                            1.1.1970) when the request has been sent.
    -Y    privacyPassphrase Set the privacy pass phrase for encrypted SNMPv3
                            messages.
    -a    authProtocol      Set the authentication protocol used to
                            authenticate SNMPv3 messages. Valid values are MD5
                            and SHA.
    -bc   engineBootCount   Set the engine boot count to the specified value
                            greater or equal to zero. Default is zero.
    -c    community         Set the community for SNMPv1/v2c messages.
    -d    debugLevel        Set the global debug level for Log4J logging
                            output. Valid values are OFF, ERROR, WARN, INFO,
                            and DEBUG.
    -e    engineID          Set the authoritative engine ID of the command
                            responder used for SNMPv3 request messages. If not
                            supplied, the engine ID will be discovered.
    -h    windowSize        Set the window height in rows. If the value is
                            greater than zero, every windowSize rows the user
                            is prompted to continue output. Default is zero.
    -l    localEngineID     Set the local engine ID of the command generator
                            and the notification receiver used for SNMPv3
                            request messages. This option can be used to avoid
                            engine ID clashes through duplicate IDs leading to
                            usmStatsNotInTimeWindows reports.
    -m    mibModuleName     Load the specified MIB module from the MIB
                            repository specified by the -M option. The
                            mibModuleName can be a regular expression, e.g. use
                            'SNMPv2-.*' to load all MIB modules in the
                            repository that start with 'SNMPv2-'.
    -n    contextName       Set the target context name for SNMPv3 messages.
                            Default is the empty string.
    -r    retries           Set the number of retries used for requests. A zero
                            value will send out a request exactly once. Default
                            is 1.
    -s                      Suppress any output on stderr (silent mode).
    -t    timeout           Set the timeout in milliseconds between retries.
                            Default is 1000 milliseconds.
    -u    securityName      Set the security name for authenticated v3
                            messages.
    -v    1|2c|3            Set the SNMP protocol version to be used. Default
                            is 3.
    -w    consoleWidth      Specifies the width of the console output, default
                            is 80 characters.
    -y    privacyProtocol   Set the privacy protocol to be used to encrypt
                            SNMPv3 messages. Valid values are DES, AES
                            (AES128), AES192, AES256, and 3DES(DESEDE).

Examples:
SNMP4J-CLT -v 2c -c public create-snapshot /tmp/mibdump.sf 127.0.0.1/161 1.3.6