Wiki source code of How-to create your own SNMP agent with AGENTPP tools?
Last modified by Frank Fock on 2024/05/25 12:28
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
10.1 | 1 | This article describes step-by-step how you create your own SNMP agent (based on SNMP4J-Agent) with the AGENT++ SNMP tools MIB Designer, AgenPro, and MIB Explorer. |
| 2 | |||
| 3 | == Step-by-step guide == | ||
| 4 | |||
| 5 | The top level steps to perform are | ||
| 6 | |||
| 7 | 1. ((( | ||
| |
12.1 | 8 | [[Create your MIB specification(s) with MIB Designer>>doc:.Create MIB Specification with MIB Designer.WebHome]]. |
| |
10.1 | 9 | ))) |
| |
13.1 | 10 | 1. [[Simulate the MIB in AgenPro>>doc:.Simulate the MIB in AgenPro.WebHome]]. |
| |
10.1 | 11 | 1. Verify the MIB usability with MIB Explorer. |
| 12 | 1. ((( | ||
| |
13.1 | 13 | [[Generate the code for SNMP4J-Agent with AgenPro.>>doc:.Generate the code for SNMP4J-Agent with AgenPro.WebHome]] |
| |
10.1 | 14 | ))) |
| |
13.1 | 15 | 1. [[Integrate the generated code into the main program>>doc:.Integrate the generated code into the main program.WebHome]]. |
| |
14.1 | 16 | 1. [[Implement instrumentation code for the generated code using the SNMP4J-Agent API>>doc:.Implement instrumentation code for the generated code using the SNMP4J-Agent API.WebHome]]. |
| |
10.1 | 17 | 1. Provide initial security configuration for the agent. |
| 18 | 1. Run and test the agent. | ||
| 19 | |||
| 20 | === Advanced Topics === | ||
| 21 | |||
| |
15.1 | 22 | 1. [[How to use AgenPro generated MIB objects with multiple SNMPv3 contexts>>doc:.How to use AgenPro generated MIB objects with multiple SNMPv3 contexts.WebHome]]. |
| |
10.1 | 23 | |
| |
11.1 | 24 | {{warning}} |
| |
10.1 | 25 | This page is currently under construction and might be incomplete. |
| |
11.1 | 26 | {{/warning}} |